KTI Technologies, LLC
Spotswood, New Jersey  08884
 
                                                                                                            
Phone: 732-446-3933  Email: ktinj@optonline.net  
Your Subtitle text
INDUSTRIAL SAFETY AND AUTOMATION EQUIPMENT














6120 SERIES SAFETY LIGHT CURTAIN SYSTEMS AVAILABLE WITH STANDARD AND BLANKING OPERATION

                                                                                      


KTI Series 6120 Safety Light Curtains protect machine operators from hazards associated with operating machinery by extending a columnated "curtain of light" in front of the dangerous area. If the workers hands interrupt the light curtain, a signal is sent within milliseconds to the stop circuit of the machine.

These units are interchangeable and function with the Weldotron 8220 and 8230 series Safety Light Curtain Systems. Compatibility of either projector or receiver and or control box can be installed as a direct replacement.

KTI Technologies also offers replacement and repair parts for the Weldotron Light Curtain Systems, refer to our replacement part link for more detail.






SN-3000-AS-LLC RF PRESENT SENSING DEVICE




The KTI Present Sensing Device SN-3000-AS-LLC protects personnel from hazards by constructing a sensing field around the area of a production operation. Once the antenna is constructed the system is tuned and balanced. Any entry into the sensing field offsets the balance and trips the unit and a signal is sent to the stop circuit of the machinery.

The SN-3000-AS-LLC is interchangeable and directly replaces the Weldotron Sentry 8003A, 8003B and 8003C RF sensing devices.

KTI Technologies also offers replacement and repair parts for the Weldotron Sentry (RF) Present Sensing Device, refer to the our replacement part link for more detail.




BM-2198-AS-LLC  BRAKE MONITOR AND STOP TIME DEVICE





The KTI Time Based Brake Monitor and Stop Time device is designed to meet or exceed control reliability standards as stated in OSHA 1910.217 and ANSI B11.1-1988. In operation the BM-2198-AS-LLC will continuously monitor brake wear at each stop condition to ensure operator safety. As the machine's brake begins to wear the BM-2198-AS-LLC will generate a brake warning indicator which will allow the user to schedule maintenance. In the event this warning indicator is ignored the BM-2198-AS-LLC will send a stop signal to the press if the actual stop time of the machine exceeds the program limit.

The BM-2198-AS-LLC is interchangeable and directly replaces the Weldotron 8401C and 8404 brake monitoring systems.

KTI Technologies also offers replacement and repair parts for the Weldotron 8404 brake monitoring system, refer to the our replacement part link for more detail.





PMD  PROGRAMMABLE DIE PROTECTION

SIX STATION DIE PROTECTION SYSTEM WITH PROGRAMMABLE TIMING WINDOWS




The KTI PMD (PD-1633-AS-LLC) unit incorporates the latest in microprocessor technology and is designed to prevent costly die damage due to improper part ejection, die overload, misfeed, and other malfunctions of automatic punch press operations.

The PMD has a 6 channel capability, each with the ability to program one of 5 functions. Two different timing windows can be internally generated by inputting a single main timer  switch signal. These timing windows are programmed in degrees of crank rotation (example: on at 270 degrees off at 90 degrees).

Other important features include a timer fail-safe circuit, preset counter, a batch counter, a counter aux. relay output for automation control and a S.P.M (strokes per minute) monitor with display.

The PMD is also equipped with a 12V dc low voltage power supply for use with low voltage in-die sensors. All station inputs are connected directly to the face of the PMD or can be connected to an optional sensor interface disconnect block which inter-connects to the PMD.



                              "AUTOMIC" DIE MONITORING SYSTEM

                 AUTOMATIC, NON-CONTACT DIE MONITORING, QUALITY CONTROL SYSTEM





Utilizing automatic sampling and adaptive learning techniques, the KTI Technologies Auotmic (DP-4066-AS-LLC) monitors the clearance between the press slide and die. The Automic interfaces with the SW-1220-AS-LLC high frequency sensor which mounts to the stripper plate. lower die or other stationary die components. Accurate to .00004 inches at speeds up to 2500 strokes per minute. The Automic will activate your machine stop circuit if pre-set high or low limits are exceeded. No machine calibration or external timing sensors is required.






KTI Technologies, LLC  is a manufacture of industrial safety light curtain systems and automation equipment.

  
PAGE UNDER CONSTRUCTION..

WE APOLOGIZE FOR THE INCONVENIENCE OF INFORMATION HOWEVER, OUR WEB-SITE IS UNDER CONSTRUCTION. IF YOU HAVE QUESTIONS REGARDING OUR PRODUCTS PLEASE CONTACT OUR OFFICE AT 732-446-3933.


KTI Technologies LLC Visitors


Website Builder